How to Take Care of Sanitary Works?

How to Take Care of Sanitary Works?

The care for sanitary works must be given before and after the fittings. It is to be noted that fittings have to be done only as the last step in the construction of a bathroom. After all the construction as well as plumbing works is completed, the water should be passed through the pipes at least for 6 hours in order to remove the dirt and unwanted particles in the pipes. The pressure of the water should be properly regulated. This method can help to avoid the health issues and the damage to the sanitary fittings.

Always try to maintain the cleanliness of bathroom. In fact the fittings should be placed in clean bathroom. If the fittings are unpacked make sure they are not placed on the rough surface. The screw wrench can be covered with a soft cloth to avoid extra pressure on the fittings. After the fitting is done, the products should be washed properly with diluted shampoo or washing powder using a clean cloth. Afterwards, it should be dried with clean cloth. The remaining of continuous of excess water over the fittings can result in resting. In case of no immediate use of sanitary fittings, a polythene bag can be used to wrap the fittings after applying a little car polish.

The cleaning of water tanks in the houses can increase the life of sanitary fittings. The main line of water should have a filter through which unwanted particles and dust in the water is removed. This helps in the extension of good performance of fittings. Periodical cleaning of the fittings should be done using dilute shampoo, washing powder or quality toilet soap. It is always kept in mind that soft clothes are used for the cleaning purposes. After cleaning dry it using a soft cloth. Polish can also be used in intervals.

Leave a Reply

Your email address will not be published. Required fields are marked *